Using the Hydrodouche
Caution! When using the Hydrodouche ensure the water is at the correct temperature to avoid the possibility of discomfort, bearing in mind that parts of the body have differing tolerance to temperature, both hot and cold. Also consider the flow rate and adjust it to a minimum initially.
Before using the Hydrodouche ensure that the hydro wand is placed upright in the holder and that the flow regulator is fully depressed in the off position.
Start your shower and select a suitable water temperature. Allow the hydro chamber to fill with water until it overflows. Remove the hydro wand from the holder and whilst holding it with the tip pointing downwards, fully open the flow regulator thereby allowing the water to flow through the hose displacing any air. Once a steady flow is achieved, double-check the water temperature is correct and adjust the flow regulator to the desired level. Check that there is sufficient water in the chamber for the intended use and top up if necessary. Alternately the shower head may be positioned over the chamber to provide a constant flow.